The Flexa RQMS 15020006211 (Old Part Number 5020.006.211) is a 1 x 15.8 mm OD low-profile heavy-duty mounting clamp for use with corrugated plastic conduits like ROHRflex.
The two-piece block-style clamp installs easily anywhere using two M6 bolts (sold separately). Lateral conduit strain relief is also provided by an internal rib which locks firmly into a single conduit corrugation groove.
Applications for the RQMS conduit clamp: This low-profile clamp is ideal for limited space heavy duty securing of conduits like in machine building, plant automation, as well as for mounting robot and cobot dress kits. It ensures conduits remain securely in place while providing lateral strain relief.
The Flexa RQMS 15020006216 (Old Part Number 5020.006.216) is a 1 x 21.2 mm OD low-profile heavy-duty mounting clamp for use with corrugated plastic conduits like ROHRflex.
The two-piece block-style clamp installs easily anywhere using two M6 bolts (sold separately). Lateral conduit strain relief is also provided by an internal rib which locks firmly into a single conduit corrugation groove.
Applications for the RQMS conduit clamp: This low-profile clamp is ideal for limited space heavy duty securing of conduits like in machine building, plant automation, as well as for mounting robot and cobot dress kits. It ensures conduits remain securely in place while providing lateral strain relief.
The Flexa RQMS 15020006221 (Old Part Number 5020.006.221) is a 1 x 28.5 mm OD low-profile heavy-duty mounting clamp for use with corrugated plastic conduits like ROHRflex.
The two-piece block-style clamp installs easily anywhere using two M6 bolts (sold separately). Lateral conduit strain relief is also provided by an internal rib which locks firmly into a single conduit corrugation groove.
Applications for the RQMS conduit clamp: This low-profile clamp is ideal for limited space heavy duty securing of conduits like in machine building, plant automation, as well as for mounting robot and cobot dress kits. It ensures conduits remain securely in place while providing lateral strain relief.
The Flexa RQM2 15020008201 (Old Part Number 5020.008.201) is a 2 x 42.5 mm OD heavy-duty mounting clamp for use with corrugated plastic conduits like ROHRflex.
The two-piece block-style clamp installs easily anywhere using M6 bolts (sold separately). Lateral conduit strain relief is also provided by an internal rib which locks firmly into a single conduit corrugation groove.
Applications for the RQM2: This clamp is ideal for heavy duty securing of conduits in multi-conduit trunking runs on passenger rail car rooftops and undercarriages. It ensures conduits stay in place while providing lateral strain relief. The RQM family of mounting clamps, ranging from single to quad conduit configurations, are both stackable and combinable.
The Flexa RQM3 15020008202 (Old Part Number 5020.008.202) is a 3 x 42.5 mm OD heavy-duty mounting clamp for use with corrugated plastic conduits like ROHRflex.
The two-piece block-style clamp installs easily anywhere using M6 bolts (sold separately). Lateral conduit strain relief is also provided by an internal rib which locks firmly into a single conduit corrugation groove.
Applications for the RQM3: This clamp is ideal for heavy duty securing of conduits in multi-conduit trunking runs on passenger rail car rooftops and undercarriages. It ensures conduits stay in place while providing lateral strain relief. The RQM family of mounting clamps, ranging from single to quad conduit configurations, are both stackable and combinable.
The Flexa RQM4 15020008203 (Old Part Number 5020.008.203) is a 4 x 42.5 mm OD heavy-duty mounting clamp for use with corrugated plastic conduits like ROHRflex.
The two-piece block-style clamp installs easily anywhere using M6 bolts (sold separately). Lateral conduit strain relief is also provided by an internal rib which locks firmly into a single conduit corrugation groove.
Applications for the RQM4: This clamp is ideal for heavy duty securing of conduits in multi-conduit trunking runs on passenger rail car rooftops and undercarriages. It ensures conduits stay in place while providing lateral strain relief. The RQM family of mounting clamps, ranging from single to quad conduit configurations, are both stackable and combinable.
The Flexa RQM3 15020008205 (Old Part Number 5020.008.205) is a 3 x 28.5 mm OD heavy-duty mounting clamp for use with corrugated plastic conduits like ROHRflex.
The two-piece block-style clamp installs easily anywhere using M6 bolts (sold separately). Lateral conduit strain relief is also provided by an internal rib which locks firmly into a single conduit corrugation groove.
Applications for the RQM3: This clamp is ideal for heavy duty securing of conduits in multi-conduit trunking runs on passenger rail car rooftops and undercarriages. It ensures conduits stay in place while providing lateral strain relief. The RQM family of mounting clamps, ranging from single to quad conduit configurations, are both stackable and combinable.
The FLEXAquick® RQBK90DR-N 15020019216 (Old Part Number 5020.019.216) is a black plastic 90° elbow conduit connector with 1″ NPT swivel nickel-plated brass outer thread.
The RQBK90DR-N uses the FLEXAquick® quick-connect system with an integrated lock and release sleeve and built-in IP68 / IP69K sealing. It installs in seconds for “Quick-connect on” fitting assembly or “Quick-disconnect off” fitting disassembly, with no tools required for quick conduit connection or disconnection.
The swivel NPT threaded end allows the complete fitting body and attached conduit to be repositioned after the threaded end has been tightened into a threaded device or secured with a locknut. This helps the installer move the fitting and conduit side to side as needed for easier alignment around nearby objects, cabling, and restricted cable entry areas.
The Flexa RQBK90DR-N 15020019217 (Old Part Number 5020.019.217) is a Black plastic 90° bend elbow conduit connector with swivelling 1 1/4″ NPT metal thread.
Highlights:
thread length = 17.0 mm
turnable, swivelling nickel-plated brass outer thread, swivels both post & pre-installation
smooth bore gentle 90° bend elbow
includes sealing rings: one each of “OR type” O-ring and “FRH type” flat sealing ring
It features the Flexaquick quick connect system with an integrated lock & release sleeve and built-in IP68 sealing. Installs in seconds for Quick “on” assembly, or Quick “off” disassembly. NO tools required!
Use the RQBK90DR-N conduit connector with all fine or coarse corrugation plastic conduits of matching outside diameter (OD).
The Flexa RQM 15020020216 (Old Part Number 5020.020.216) is a 1 x 21.2 mm OD heavy-duty mounting clamp for use with corrugated plastic conduits like ROHRflex.
The two-piece block-style clamp installs easily anywhere using two M6 bolts (sold separately). Lateral conduit strain relief is also provided by an internal rib which locks firmly into a single conduit corrugation groove.
Applications for the RQM conduit clamp: This clamp is ideal for heavy duty securing of conduits on passenger rail car rooftops and undercarriages, as well as for mounting robot and cobot dress kits. It ensures conduits remain securely in place while providing lateral strain relief. The RQM family of mounting clamps, ranging from single to quad conduit configurations, are both stackable and combinable.
The Flexa RQM 15020020221 (Old Part Number 5020.020.221) is a 1 x 28.5 mm OD heavy-duty mounting clamp for use with corrugated plastic conduits like ROHRflex.
The two-piece block-style clamp installs easily anywhere using two M6 bolts (sold separately). Lateral conduit strain relief is also provided by an internal rib which locks firmly into a single conduit corrugation groove.
Applications for the RQM conduit clamp: This clamp is ideal for heavy duty securing of conduits on passenger rail car rooftops and undercarriages, as well as for mounting robot and cobot dress kits. It ensures conduits remain securely in place while providing lateral strain relief. The RQM family of mounting clamps, ranging from single to quad conduit configurations, are both stackable and combinable.
The Flexa RQM 15020020229 (Old Part Number 5020.020.229) is a 1 x 34.5 mm OD heavy-duty mounting clamp for use with corrugated plastic conduits like ROHRflex.
The two-piece block-style clamp installs easily anywhere using two M6 bolts (sold separately). Lateral conduit strain relief is also provided by an internal rib which locks firmly into a single conduit corrugation groove.
Applications for the RQM conduit clamp: This clamp is ideal for heavy duty securing of conduits on passenger rail car rooftops and undercarriages, as well as for mounting robot and cobot dress kits. It ensures conduits remain securely in place while providing lateral strain relief. The RQM family of mounting clamps, ranging from single to quad conduit configurations, are both stackable and combinable.
The Flexa RQM 15020020236 (Old Part Number 5020.020.236) is a 1 x 42.5 mm OD heavy-duty mounting clamp for use with corrugated plastic conduits like ROHRflex.
The two-piece block-style clamp installs easily anywhere using two M6 bolts (sold separately). Lateral conduit strain relief is also provided by an internal rib which locks firmly into a single conduit corrugation groove.
Applications for the RQM conduit clamp: This clamp is ideal for heavy duty securing of conduits on passenger rail car rooftops and undercarriages, as well as for mounting robot and cobot dress kits. It ensures conduits remain securely in place while providing lateral strain relief. The RQM family of mounting clamps, ranging from single to quad conduit configurations, are both stackable and combinable.
The Flexaquick® RQBK90-N 15020022216 (Old Part Number 5020.022.216) is a Black plastic 90° bend elbow conduit connector with 1″ NPT nickel-plated brass thread.
The RQBK90-N features the FLEXAquick® quick connect system with an integrated lock & release sleeve and built-in IP68 sealing. Installs in seconds for “Quick-connect on” assembly, or “Quick-disconnect off” disassembly. NO tools required!
The Flexaquick® RQBK90-N 15020022217 (Old Part Number 5020.022.217) is a Black plastic 90° bend elbow conduit connector with 1 1/4″ NPT nickel-plated brass thread.
The RQBK90-N features the FLEXAquick® quick connect system with an integrated lock & release sleeve and built-in IP68 sealing. Installs in seconds for “Quick-connect on” assembly, or “Quick-disconnect off” disassembly. NO tools required!
